Makita HR4003C 110V 40mm SDS Max Rotary Demolition Hammer Drill with Case
Makita HR4003C 110V 40mm SDS Max Rotary Demolition Hammer Drill with Case
Features:
Makita HR4003C:
Variable speed control.
Soft start
Constant speed control
One touch sliding chuck for easy bit installation and removal.
Adapted for SDS-Max bits
2-mode operation: Rotation with hammering / Hammering only
Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.
Torque limiter
Serial number label located in a position protected from damage/scratching
Ergonomic soft grip
In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications.
LED service light indicates when to replace carbon brush.
Comes With:
Side handle
Depth stop
Bit grease
Carry case
Product Specification:
Makita HR4003C:
Barcode: 0088381651363
Input wattage: 1,100 w
Shank: SDS-MAX
Impact energy: 8.3 J
Max in concrete: 40 mm
Max core diameter (TCT): 105 mm
Optimum Drilling Range: 16 - 35 mm
Blows per minute: 1450 - 2900 bpm
No Load Speed: 250 - 500 rpm
Vibration K factor: 1.5 m/sec²
Vibration: Chiselling: 9.0 m/sec²
Vibration: Hammer Drilling: 10.0 m/sec²
Noise sound pressure: 92 dB(A)
Noise K factor: 3 dB(A)
Noise sound power: 103 dB(A)
Net weight: 6.2 – 6.4 kg
**images for illustrative purposes only – please refer to description and specification for full details of product**