Makita HR4003C 240V 40mm SDS Max Rotary Demolition Hammer Drill with Case
Variable speed control.
Constant speed control
One touch sliding chuck for easy bit installation and removal.
Adapted for SDS-Max bits
2-mode operation: Rotation with hammering / Hammering only
Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.
Serial number label located in a position protected from damage/scratching
Ergonomic soft grip
In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications.
LED service light indicates when to replace carbon brush.
Input wattage: 1,100 w
Impact energy: 8.3 J
Max in concrete: 40 mm
Max core diameter (TCT): 105 mm
Optimum Drilling Range: 16 - 35 mm
Blows per minute: 1450 - 2900 bpm
No Load Speed: 250 - 500 rpm
Vibration K factor: 1.5 m/sec²
Vibration: Chiselling: 9.0 m/sec²
Vibration: Hammer Drilling: 10.0 m/sec²
Noise sound pressure: 92 dB(A)
Noise K factor: 3 dB(A)
Noise sound power: 103 dB(A)
Net weight: 6.2 – 6.4 kg
**images for illustrative purposes only – please refer to description and specification for full details of product**