C-TEC 50ml SuperFast Plus Extra Strong Adhesive Glue & 150ml Super Glue Activator
C-TEC 50ml SuperFast Plus Extra Strong Adhesive Glue & 150ml Super Glue Activator
Features:
SuperFast Plus Super Glue Activator:
SUPER FAST PLUS is an adhesive which bonds in seconds and has a special formula based on Cyanacrylate.
Specifically developed to seal porous substrates like wood, leather and stone, ensuring a strong bond when used with Superfast Plus adhesive.
One-component adhesive which is solvent-less and consists mainly of Ethyl Cyanacrylate Monomer.
Dries in approximately 10 to 60 seconds, allowing for rapid application and bonding
Maintains bond integrity in a wide temperature range from -60°C to 100°C
It is resistant to solvents, oils, benzene, temperature fluctuations and atmospheric conditions.
SUPER FAST PLUS joints have a high tensile shear strength and show no shrinkage.
Safe for use on various materials without leaving residues or causing damage.
SuperFast Plus Adhesive Glue:
Extra strong cyanoacrylate adhesive bonds and fuses materials in seconds
One component, solvent-free formula with Ethyl Cyanacrylate Monomer
Exceptional bonding strength across wide range of common materials
Temperature resistant from 30°C up to 100°C
Resistant to solvents, oils, benzene and atmospheric conditions
Suitable for metals, plastics, rubber, glass and ceramics
Use with Superfast Plus Activator for improved bonding on porous substrates.
Product Specification:
SuperFast Plus Super Glue Activator:
Part Number: S7501101
Barcode: 5060209630137
Colour: Crystal Clear
Volume: 150ml
Viscosity; m Pa.s’Brookfield: 120 cps
Specific Gravity: 1.05 g/cm³ / VOC 20 g/l
Flash Point DIN 55213 in º C: 80ºC
Cure System: Humidity
Fixture Speed: < 8 Seconds @ 20ºC
Typical Strength: 5 to 28 N/mm²
Gap Fill: 0.1mm
Pack Size: 1
SuperFast Plus Adhesive Glue:
Part Number: S7501904
Barcode: 5060209630120
Colour: Crystal Clear
Volume: 50ml
Viscosity; m Pa.s’Brookfield: 120 cps
Specific Gravity: 1.05 g/cm³ / VOC 20 g/l
Flash Point DIN 55213 in º C: 80ºC
Cure System: Humidity
Fixture Speed: < 8 Seconds @ 20ºC
Typical Strength: 5 to 28 N/mm²
Gap Fill: 0.1mm
Pack Size: 1
**images for illustrative purposes only – please refer to description and specification for full details of product**
